Top 10 Nokia N97 Games

Bejeweled	The Sims 3	PAC-MAN	Tetris	FIFA Manager 10
Tiger Woods PGA TOUR 11	Worms 2008	Doodle Jump	Monopoly Here and Now	Hotel Tycoon Resort

Read more »

Sekadar Inginkan Pendapat Mengenai Gambar Ini...

Assalammualaikum,

Inzinkan saya menarik perhatian anda semua, saya nie baru menerokai alam jurugambar dan inginkan anda membuat komen mengenai gambar yang akan saya paparkan dibawah nie.. Sejujurnya komenlah apa sahaja yang ingin ada katakan untuk memperbaiki mutu serta kualiti gambar saya.. Komenlah, kutuklah, terjahlah dan berilah segala pendapat dan kepakaran anda buat saya memperbaikinya............

Segala komen dan terjahan anda akan diterima dengan ikhlas dan penuh kesyukuran... Terima Kasih

Inilah Gambarnya :-

Terima Kasih,

Salam 1 Malaysia

Read more »

Is HSBB available in my area?

Here, we show you where and when.

* The information displayed is accurate at the time of publishing. It is subject to change from time to time.

Area Name	Support for	Readiness
Bangsar	Residential / Business	Q1 2010
Shah Alam	Residential / Business	Q1 2010
Subang	Residential / Business	Q1 2010
Taman Tun Dr. Ismail	Residential / Business	Q1 2010
Bayan Baru	Business	Q3 2010
Bukit Kemuning	Residential / Business	Q3 2010
Bukit Tengah	Business	Q3 2010
Cyberjaya	Residential / Business	Q3 2010
Damansara	Residential / Business	Q3 2010
Duta	Residential / Business	Q3 2010
Kepong	Residential / Business	Q3 2010
Keramat	Residential / Business	Q3 2010
KL International Airport	Residential / Business	Q3 2010
Kulim HighTech park	Business	Q3 2010
Lapangan Terbang Subang	Residential / Business	Q3 2010
Melawati	Residential / Business	Q3 2010
Menara TM	Residential / Business	Q3 2010
Midah	Residential / Business	Q3 2010
Permas	Business	Q3 2010
Petaling Jaya	Residential / Business	Q3 2010
Puchong	Residential / Business	Q3 2010
Putrajaya	Residential / Business	Q3 2010
Seberang Jaya	Business	Q3 2010
Senai	Business	Q3 2010
Skudai	Business	Q3 2010
Sungai Buloh	Residential / Business	Q3 2010
Sungai Long	Residential / Business	Q3 2010
Telok Panglima Garang	Business	Q3 2010
Wangsa Maju	Residential / Business	Q3 2010
Batu	Residential / Business	Q4 2010
Bukit Bintang	Residential / Business	Q4 2010
Cheras	Residential / Business	Q4 2010
Jln Kebun	Residential / Business	Q4 2010
Kelana Jaya	Residential / Business	Q4 2010
KL Central	Residential / Business	Q4 2010
Klang	Residential / Business	Q4 2010
Kuala Pauh	Residential / Business	Q4 2010
Pekeliling	Residential / Business	Q4 2010
Saga	Residential / Business	Q4 2010
San Peng	Residential / Business	Q4 2010
Selayang	Residential / Business	Q4 2010
Sentul	Residential / Business	Q4 2010
Serdang	Residential / Business	Q4 2010
Setapak	Residential / Business	Q4 2010
Sg. Renggam	Residential / Business	Q4 2010
Taman Petaling	Residential / Business	Q4 2010

Read more »

How to Create a Photo Manipulation of a Flooded City Scene

In this tutorial, we will learn how to manipulate a simple photo into a flooding torrent of a scene. We’ll use some relatively simple techniques to give this image a semi-realistic, stylized feel. Let’s get started!

Final Image Preview

Take a look at the image we’ll be creating. Want access to the full PSD files and downloadable copies of every tutorial, including this one? You can view the final image preview below.

Video Tutorial

Our video editor Gavin Steele has created this video tutorial to compliment this text + image tutorial.

Step 1

With the main image opened, use the Clone Stamp tool to remove any unwanted entities, like the elderly couple walking. Try and clone areas around the couple so it doesn’t look odd and mix your usage of soft, and heavy round brushes to define those edges.

Step 2

Next you will want to cut around the edges of the roof tops so we can add in our stormy sky. Use the Polygon Lasso Tool for this. Don’t worry about accuracy, as we’ll be blending everything later, just make sure that the sky is cut out. Once selected, unlock the “background.” Now double-click the layer, then rename it to “backdrop” and hit Enter. Delete the sky.

Step 3

Open the Stormy Sky image and place it underneath your “backdrop” layer. Then press Command + T to Free Transform), hold Command while you drag the bottom corners inwards to add some perspective to the sky, don’t forget to resize if necessary. Apply the transformation when you are happy.

Step 4

It doesn’t look very nice does it? That’s because we’re not done yet. Open and place the wave image in the center of the image. Now use the eraser, and a soft brush on it. Get in close and erase the bits you don’t want. Don’t worry if your messy, as the tidying comes later.

Then go to Image > Adjustments > Brightness/Contrast and use the settings shown below.

Then go to Image > Adjustments > Hue/Saturation and use these settings.

Rename the layer to “Wave,” and your image should now look like the one shown below.

Step 5

Now comes the complicated bit. What you’ll need to do is add all the water files to you’re image and one by one, free transform them to flow with the perspective of the water then erase the hard edges.

You might also need to duplicate some files in order to fill up areas. Always remember to play about with the textures using the distortion method in free transform and a soft eraser. The more you do, the better it will look. You can see the phases of building up the flooding water in this image.

Step 6

Now we have our water sorted, merge all the “water” layers into one single layer and go to Image > Adjustments > Color Balance and use the following settings.

Your water should now be nice and blue and match the “wave” layer from earlier. Now merge the “wave” layer with the “water” one.

Step 7

Remember the tidy up I mentioned a while back? Well its time now. Turn off the “water” layer so you are left with just the backdrop and the sky.

With the Burn Tool selected at highlights and at 50% exposure, and a soft brush set, start burning the rooftops and the sky around the rooftops so they appear darker.

Open the derelict1 image and place it at the right side of the street in the distance. Use a soft eraser to remove those sharp edges. Merge it with the “backdrop” layer.

Step 8

Let’s tidy up some more. Turn on the “water” layer sand and start tidying around the edges using a soft eraser. Then select the Smudge Tool and a 20px charcoal brush using the settings below.

Start smudging the edges of the “water” layer creating very small splashes and more defined edges to realistically create the effect of water hitting a surface. This might require patience and a steady hand, but time will pay off. It might also be wise to duplicate the layer before smudging as you don’t want to use all your undo’s.

Step 9

Next, select the backdrop layer and go to Image > Adjustments > Color Balance and use these settings.

And your piece should now be coming together. Its still a little off, but there is a lot more to do, so lets move on!

Step 10

Time for the splashes. Now this is the hardest step of the tutorial, and requires a lot of patience, but persevere and you will find that patience is in fact a virtue (I know, silly right?).

Open up the splash1 and splash2 images and carefully cut out the splashes themselves one by one. Place them onto the canvas. Now use the Warp Transformation (Edit > Transform > Warp) to get the arches you need to create effective splashes, and erase any unwanted areas.

You’ll need to do this for the two cars and for where the water hits the wall down the buildings of the street.

You might also benefit from smudging the edges of the splashes to give them more movement, as well as adding some white brushing to a new layer and smudging it. Now merge all your “splash” layers.

Step 11

Getting there right? Now you need to do some tweaking to the colors of the image. This can mean anything from water, to the sky or the buildings. In my example, I think the water is a little too blue, so I’m going to desaturate it a little.

Basically use this step for any odd bits and bobs to tweak your image to make it look more streamlined. Be creative, and more importantly, make it look tidy. I lowered the saturation of the water a little, and added some red to the buildings.

Step 12

Now we’ll work on the fog. Its sounds daunting but its actually fairly simple to do. Select a blue color from your water using the Eyedropper Tool. Now select the Gradient Tool and use the following settings.

You will need to create a new layer underneath you’re “water” layer and create the gradient so it blocks out any backdrop behind the water.

Duplicate the layer (Command + J) and place it on top of your water layer, at about 30% opacity. Set this layer to Multiply.

Step 13

This next step is to add rain. There are lots of tutorials on the web that show how to create rain. Here is one that goes into great detail, which you could check out. We’ll keep it relatively simple in this tutorial though. First, create a new layer and fill it with black. Go to Filter > Noise > Add Noise and use these settings.

Then Filter > Blur > Motion Blur> and use these settings.

Then Image > Adjustments > Levels and use the following settings.

Set the Layer to Screen and use a soft eraser to erase the bottom and top of the Layer, then go to Edit > Transform > Free Transform the “rain” Layer so it covers the whole screen.

Step 14

It looks a little bit empty in the middle of the water doesn’t it?

Open up the car image and place it somewhere in the distance, underneath the “fog” layer. Resize the images and erase the edges carefully and use the splash1 image to give some life to the car.

Step 15

Now is the fun part. You’ll need to create a few gradient maps first. Click the Adjustment layer button located at the bottom of your layers window and select the Gradient Map option. Then Click the little arrow in the top-right of the box and select Pastels as shown.

Use the following settings. Finally, set the layer to Multiply at 100%.

Conclusion

Now its just a case of adding depth and a few other adjustments. Select the Blur Tool at 20% strength, then start blurring the “backdrop” layer in the distance and on the rooftops.

Create a new layer and go to Image > Apply Image and then go to Filter > Sharpen > Sharpen, which gives the image a more detailed and stylized feel. Now you’re done!

Read more »